NETLAB+
About NETLAB+
Supported Lab Devices - NETLAB+ VE
NETLAB+ may be used to facilitate access to lab equipment. Lab equipment is used for actual course work and includes routers, switches and firewalls. Lab devices are part of a topology and users can interact with them either directly or indirectly.
Lab devices and control devices are required in order to support Cisco Networking Academy lab content.
Cisco Standard Topology Configurations
Lab Routers
| Cisco Router Model |
|---|
| 1921 |
| 1941 |
| 2901 |
| 2911 |
| 4221 |
| 4321 |
| 4331 |
Lab Switches
Please Note: This table lists switch types that can be used in lab pods. Switches that can be used as NETLAB+ VE control switches are listed on the control devices page.
| Cisco Switch Model | IOS, SW Image(s) Tested by NDG |
|---|---|
| Cisco 2960+24TC-L, Cisco 2960-24TT-L |
c2960-lanbasek9-mz.150-2.SE7.bin, c2960-lanbasek9-mz.150-2.SE8.bin DOES NOT WORK: c2960-lanbasek9-mz.152-2.E7 |
| WS-C3650-24TS-E, WS-C3650-24PS-E |
cat3k_caa-universalk9.SPA.03.06.05.E.152-2.E5.bin |
| WS-C2960+24TC-L | 15.0.2-EZ(ED) |
Lab Security Devices
| Cisco Device Model |
|---|
| ASA5505 |
| ASA5506 |